2024 3rd International Conference on Aerospace, Aerodynamics and Mechatronics Engineering (AAME 2024)



Committee of AAME 2024

Conference General Chairs


Prof. Junhui Hu

Nanhang University, China

Brief: Junhui Hu received his Ph.D. Degree from Tokyo Institute of Technology, Tokyo, Japan, in 1997, and B. E. and M. E. degrees in electrical engineering from Zhejiang University, Hangzhou, China, in 1986 and 1989, respectively. Currently he works for Nanjing University of Aeronautics & Astronautics, China, as a full professor. His research interest is in ultrasonic sensors and actuators, ultrasonic nano fabrication, ultrasonic micro/nano/molecular manipulations, etc. He is a Chang-Jiang Distinguished Professor, China, and an IAAM Fellow.


Prof. Jie Liu

Carleton University, Canada

IEEE Senior Member

Brief: Prof. Jie (Peter) Liu is leading international research efforts in Prognostics and Health Management (PHM) with applications to several engineering systems including gas turbine engines, lithium ion batteries, and mechanical power transmissions. His research contributions have led to 56 journal papers and 36 conference papers. Among these publications, there are 17 papers published in journals with an impact factor higher than 8 (highest impact factor: 39.714) , 3 papers rated as ESI highly cited papers, 8 papers that received over 250 citations, and the total citations are over 5000 (Google Scholar). Five of his papers were regarded as seminal papers in the field, including a conference paper published in the Proceedings of PHM 2010 International Conference. Four of his papers were cited by Wikipedia under "Maintenance (technical)", "Prognostics", "Particle filter", and "Intelligent Control", respectively.

Organizing Committee Chair

Prof. Zhiyuan Yao

Nanhang University, China

Brief: Member of Chinese Society of Aeronautics and Astronautics; Senior Member of Chinese Society of Mechanics; Executive Director of National University Mechanical Engineering Testing Technology Research Association; Standing Member of Dynamic Test Committee of Chinese Society of Vibration Engineering; Executive Editor and deputy editor of the 7th Editorial Board of Vibration, Test and Diagnosis. He has been engaged in structural vibration characteristics analysis and dynamic modeling research work for a long time. The research involves vibration and noise estimation and control of vehicles; Modal identification and damage identification of large structures based on environmental vibration. In 2004, he engaged in the research of ultrasonic motor technology, involving the structural dynamics analysis of ultrasonic motor, dynamic modeling, rotor contact friction mechanism, and ultrasonic motor structure design.

Publication Chair

Assoc. Prof. Chao Liu

Guizhou Minzu University, China

Brief: He is mainly engaged in scientific research in the field of flight dynamics and control. His research interests are mainly in the geometric representation of complex aircraft systems and the application of differential geometry methods in control technology. At present, has presided over or participated in the National Natural Science Foundation, Guizhou Province basic research project and other 4 research projects, and applied for 2 national invention patents. Published 10 papers.

Research interest:Dynamics and control, intelligent sensing and detection technology

Technical Program Committee Chairs

Prof. Dong Han

Nanhang University, China

Brief: Han Dong, male, born in 1968, Ph.D., Professor of Engineering thermal physics. He is mainly engaged in the teaching and research of new energy and energy-saving technology. The first batch of "321" leading talents in Nanjing. Visiting scholar, UBC University, Hong Kong University of Science and Technology, Swinburne University of Technology, Australia. The director of China Energy Society, the subject degree evaluation expert of the Ministry of Education, the graduate degree thesis evaluation expert of the Ministry of Education, the National College students' Energy conservation and emission reduction competition evaluation expert, the science and Technology Achievement Award evaluation expert of Jiangsu Province, the high-tech enterprise evaluation expert of Jiangsu Province, the science and technology evaluation and consulting expert of Jiangsu Province, and the executive director of Jiangsu Engineering Thermophysics Society Director, Vice President of Science and Technology of Jiangsu Province, Secretary-General of Nanjing Solar Energy Society, etc. He has been engaged in the research work of mechanical steam recompression (MVR), high efficiency energy system, semiconductor temperature difference power generation system, solar thermal utilization, high efficiency heat transfer technology, etc. At present, it has published more than 100 SCI papers above the two regions, of which 1 was highly cited, applied for more than 90 invention patents, and has authorized nearly 80, of which 8 are transferred, exclusive license and general license 3. Served as a reviewer of SCI journals of Applied Energy, Energy, Desalination, Energy Conversation and Management, etc. He is the reviewer of important domestic core journals such as Journal of Engineering Thermophysics, Journal of Chemical Engineering and Journal of Aeronautical Science.


Prof. Changjun Chen

Suzhou University, China

Brief: He is now a member of the Additive Manufacturing National Standards Committee, a member of IEEE International Standards Committee, a national major special additive manufacturing and laser manufacturing project review expert, and the Secretary General of the Yangtze River Delta G60 laser Industry Innovation Alliance. Secretary General of Jiangsu Laser Industry Development Strategic Alliance, Deputy director of Surface Engineering Equipment Committee, member of laser Processing Committee of Chinese Optical Society, member of Optoelectronic Technology Committee of Chinese Society of Astronautics, director of Hubei and Wuhan Laser Society, etc. He is currently on the International editorial board of the International Journal of Surface Engineering and Interdisciplinary Materials Science. Editorial board member of the Chinese core journals "Modern Manufacturing Engineering", "Applied Laser" and "Material Protection". He has published more than 200 papers, published more than 100 academic papers in Sci and Ei, and authorized more than 30 invention patents, among which an article in the second region won the honor of top cited papers in 2020-2021. In 2016, it was awarded the title of the Best paper by the North American Machinery Manufacturing Association.

Organizing Committees

Prof. Zhiyuan Zhu, Southwest University, China

Prof. Shengyi Yang, Guizhou Minzu University, China

Assoc. Prof. Chao Liu, Guizhou Minzu University, China

Assoc. Prof. Xiao Wang, Nanhang University, China

Technical Program Committees

Prof. Mingwei Qin, Southwest University of Science and Technology, China

Assoc. Prof. Chao Chen, Taiyuan University of Technology, China

Assoc. Prof. Wei Wei, BeiHang University, China

Dr. Siting Chen, South China University of Technology, China

Dr. Xiaoniu Li (IEEE Member), Nanhang University, China

Dr. Yisheng Gao, Nanhang University, China

Prof. Hamid Bahai,Queen Mary College, England

Prof. Dr. Murat Tolga OZKAN, Gazi University, Turkey

Prof. Alexander Lukin, Western-Caucasus Research Center, Russia

Prof. Ozgur Koray, Biruni University, Turkey

Prof. Sandeep Saxena, IMS Unison University, India 

Prof. Hossein Hosseinkhani, Innovation Center for Advanced technology, Matrix, Inc. Canada

Assoc Prof. Muhyiddine Jradi, University of Southern Denmark, Denmark

Assoc Prof. SANDIP KUNAR, Aditya Engineering College, India